CTRLmade: simple 3D design software for 3D printing, by CTRL FAM
Free during the beta · runs in your browser · built for the Bambu Lab P2S · already have an account? Log in
Simple 3D design software for 3D printing. Draw a shape, push it into 3D, cut the holes, and send it to your printer. Already have a 3MF or STL from MakerWorld, Printables or Bambu Studio? Open it and change it. Nothing to install.
EASY 3D DESIGN FOR 3D PRINTING.
Most 3D software is either a toy or a cockpit. CTRLmade is the middle: real tools, simple enough to learn in an afternoon. We built it for our own family’s printer, and now it’s yours too.
PUSH / PULL
Draw a rectangle, circle or any shape on the plate or on any face, then pull it up into a solid part. Lines snap to the red, green and blue axes.
HOLES IN ONE MOVE
Push a shape into a part for a pocket. Push all the way through and it becomes a hole. Ready-made hole shapes cut whatever they touch.
THE REAL PRINT BED
Design right on a true-size Bambu Lab P2S plate, 256 × 256 × 256 mm. Anything that won’t fit glows red.
PRINT CHECK
Before you print, it flags overlapping parts, floating parts and steep overhangs that need supports.
STL + 3MF EXPORT
Lay your parts out on the plate and export a 3MF with colors or clean STL files for Bambu Studio, OrcaSlicer, PrusaSlicer or Cura.
TRACE ANY PLAN
Load a PDF or photo, set the scale, and trace it. PDFs from CAD programs bring their real lines in to snap to.
DESIGN IT. PRINT IT.
DRAW
Sketch a shape on the plate, or drop in a box, cylinder, cone, sphere or hex from the Shapes drawer.
PUSH + PULL
Pull faces out to build it up. Push in for pockets and holes. Type exact sizes in millimeters or inches.
Hit PRINT, lay it out on the plate, and download the file for your slicer. Done.
MADE FOR MAKERS.
Name plates, Switch stands, cable clips, organizers, game pieces, a part you lost. If you can measure it, you can make it.
GOOD QUESTIONS.
Is CTRLmade free?
Yes, it’s free during the beta while we build it. Make an account and start building. Later on we may add a low-cost paid plan, and we’ll tell you before anything changes.
What 3D printers does it work with?
Any printer that takes STL or 3MF files. It was built around the Bambu Lab P2S (it shows the real 256 × 256 × 256 mm build plate), and the files open in Bambu Studio, OrcaSlicer, PrusaSlicer and Cura.
Do I need to install anything?
No. It runs in Chrome, Edge or Safari on a computer or iPad. Your builds save in your browser, and you can download a project file any time.
Is it hard to learn?
It is made to be simple. Draw a shape, push or pull it into 3D, and print. Push a shape into a part to cut a pocket, or all the way through to make a hole.
Who can use it?
Anyone 13 or older can make an account. Younger makers can use it with a parent on the parent’s account.
Can I trace a floor plan or drawing?
Yes. Load a PDF or a picture, set the scale from one known measurement, and draw right over it. PDFs made in CAD programs even bring their lines with them.
BUILD YOUR FIRST PART.
Free while we’re in beta. Make an account and you’re in.